1996 Fiscal Year Final Research Report Summary
Development of powder composite with three-dimensional and functionally gradient properties
| Project/Area Number |
07555207
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (A)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 試験 |
|---|
| Research Field |
Composite materials/Physical properties
|
|---|
| Research Institution | Nagaoka University of Technology |
|---|
Principal Investigator |
TANABE Ikuo Nagaoka University of Technology, Department of Mechanical Engineering, Associate Professor., 工作センター, 助教授 (30155189)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
FUJII Chiken TAKAMATSU MACHINERY CO., LTD,Quality guarantee, chief clerk., 品質保証部, 係長
YAMADA Yasuhiro Fukui National College of Technology, Department of Mechanical Engineering, Asso, 機械工学科, 助教授 (40220412)
MIZUTANI Jyunnosuke Toyama National College of Maritimetechnology, Department of Electronic Engineer, 電子制御工学科, 助教授 (70166015)
|
|---|
| Project Period (FY) |
1995 – 1996
|
| Keywords | Three-dimensional and functionally gradient properties / New Material / Structural material / Powder composite / Damping Material |
|---|
| Research Abstract |
In this study, ponder composite with a three-dimensional and functionally gradient properties has been developed. This material consists of epoxy resin and metal aggregate or ceramics aggregate, i. e., alumina, silicon carbide, zirconia, or a mixture of these. A calculating program of material and that weight for the desired material has developed and bending strength of the boundary area between the materials with two different strengths has been investigated. Next, thermal behavior and dynamic properties of the material have been experimentally investigated. Finally, a few application for industrial material have attempted. The results obtained are as follows.
(1) An new manufacturing method for this material has been successfully established. (2) The calculating program could sufficiently use in order to select materials and calculate that weigh. (3) Bending strength of the boundary area is an intermediate value between the two different materials. Hence, This material is only one structure. (4) It is concluded from attractive thermal and dynamic properties and industrial application that this material is very unique and effective.
|
Research Products
(2 results)
