2004 Fiscal Year Final Research Report Summary
Application Possibility of a semiconductor blue laser to Dental Light Activation Unit
| Project/Area Number |
15592036
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Conservative dentistry
|
|---|
| Research Institution | Tsurumi university |
|---|
Principal Investigator |
FUJIBAYASHI Kuniko (鈴木 久仁子) Tsurumi university, Dept. of Dentistry, assistant professor, 歯学部, 助手 (70196806)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
IKEJIMA Iwao Tsurumi university, Dept. of Dentistry, assistant professor, 歯学部, 助手 (50222865)
MATSUZAWA Norihiko Tsurumi university, Dept. of Dentistry, assistant professor, 歯学部, 助手 (80318914)
|
|---|
| Project Period (FY) |
2003 – 2004
|
| Keywords | blue semiconductor laser / light curing unit / resin conposite |
|---|
| Research Abstract |
The illuminance from blue semiconductor laser is effective to cure of resin conposite. But, the intensity of it slightly low for clinical use.
The other hand, laser beams have same remarkable specific characters for light source of light curing unit.
Laser beams were hard to be affected by decrement by distance. This characteristic can become an advantageous point.
Laser beams were irradiated to two differently shaped light guides (Straight light guide and Tapered light guide) from angles of 0, 10, 20, 30 degrees then the angles of exit beam from light guides were measured., When the angle of entrance beam is 0° for two shaped light guides, decreases in light intensity with increased distance is maybe reduced, because the angle of exit beam is 0°.
If a strong source of light is developed than a current light source, semiconductor laser as a source of light is possible in the future.
|
