2022 Fiscal Year Final Research Report
Elucidation of corrosion mechanisms and development of repair techniques for thermal-sprayed steel
Project/Area Number |
19K04581
|
Research Category |
Grant-in-Aid for Scientific Research (C)
|
Allocation Type | Multi-year Fund |
Section | 一般 |
Review Section |
Basic Section 22020:Structure engineering and earthquake engineering-related
|
Research Institution | Yamaguchi University |
Principal Investigator |
Aso Toshihiko 山口大学, 大学院創成科学研究科, 教授 (30231921)
|
Project Period (FY) |
2019-04-01 – 2023-03-31
|
Keywords | 腐食 / 溶射 / 補修 / アルミニウム溶射 |
Outline of Final Research Achievements |
Corrosion occurs even in the sprayed aluminum coating in areas exposed to a severe corrosive environment where salt tends to accumulate. The results of thickness measurements showed that there were differences depending on the position of the girders even in the healthy areas, and that the sprayed coating was thinner in the damaged areas than in the healthy areas, but there were no areas where the target film thickness was less than 160 μm. The surface profiles showed a high degree of roughness even when arc spraying was applied to seal the holes. This suggests that the surface profile of the arc sprayed steel is more susceptible to salt adhesion than that of the gas flame sprayed steel. When repairing corroded aluminum sprayed steel, it is expected that corrosion protection performance will be restored by applying aluminum-magnesium spraying after sufficient preparation of the surface.
|
Free Research Field |
鋼構造
|
Academic Significance and Societal Importance of the Research Achievements |
研究期間を通じて,(1)実橋梁における腐食調査および腐食環境調査,(2)促進試験による溶射鋼材の腐食進展状況の観察,(3)腐食した溶射鋼材の促進試験による補修効果の検討を実施した.本研究は、溶射橋梁の長寿命化を実現するための研究であり、溶射後の腐食過程の解明と補修方法の検討に主眼をおいた.この結果,腐食したアルミニウム溶射鋼材の補修にあたっては,十分な素地調整を実施した後に,アルミニウム-マグネシウム溶射を施すことで防食性能の回復が期待できる.本研究の成果は単に橋梁にとどまらず,防食方法として溶射が施された鋼構造物への応用が可能であろう.
|