2010 Fiscal Year Final Research Report
Study on 3 Dimension Geometrical Modeling of Porous Concrete and Application to Design and Construction
| Project/Area Number |
20360251
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Building structures/materials
|
|---|
| Research Institution | Mie University |
|---|
Principal Investigator |
HATANAKA Shigemitsu Mie University, 大学院・工学研究科, 教授 (00183088)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
MISHIMA Naoki 三重大学, 大学院・工学研究科, 准教授 (30335145)
|
|---|
| Research Collaborator |
YUASA Yukihisa 財団法人三重県産業支援センター, 主幹
MAEKAWA Akihiro 三重県工業研究所, ものづくり研究課, 主幹研究員
NAKAGAWA Takeshi (株)ファイナルマーケット, 代表取締役
CHINDAPRASERT Prinya タイコンケン大学, 教授
CHAREERAT Thanudkji タイカセサート大学, 講師
|
|---|
| Project Period (FY) |
2008 – 2010
|
| Keywords | ポーラスコンクリート / 幾何学モデル / 体積変化 / 品質評価 / 締固めエネルギ / 敷均し機 / 仕上げ機 / 施工標準 |
|---|
| Research Abstract |
Purpose of the present study is to establish a generalized theory, construction and quality control methods of porous concrete. From the result, a geometrical model of volume change characteristics of porous concrete was successfully proposed, as well as the geometrical models of strength and water pumping ability previously suggested by the authors. A prototype placing machine and a finisher for porous concrete work were devised, and applicability of these machines was evaluated. A method to control compaction performance of porous concrete was proposed by using the concept of vibrating energy. Finally, a construction standard of porous concrete was summarized up, based on the result of this study.
|
