2010 Fiscal Year Final Research Report
Development of molding technology by technique of plasticity processing of wood
| Project/Area Number |
20360331
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Material processing/treatments
|
|---|
| Research Institution | Kyoto Institute of Technology |
|---|
Principal Investigator |
TAKAKURA Norio Kyoto Institute of Technology, 工芸科学研究科, 教授 (40163183)
|
|---|
| Co-Investigator(Renkei-kenkyūsha) |
IIZUKA Takashi 京都工芸繊維大学, 工芸科学研究科, 准教授 (60335312)
|
|---|
| Project Period (FY) |
2008 – 2010
|
| Keywords | 材料加工・処理 / 塑性加工 / 環境材料 / バイオマス / 廃棄物再資源化 |
|---|
| Research Abstract |
The development of the molding technology by the technique of the plasticity processing of the wood which was low environmental load and recycling materials was carried out. The wood including the water showed good fluidity by compressing it with heating in a sealing up die. And the wood filled it in a die, and the product which solidified was provided. The density and the Vickers hardness of products were approximately 1.35g/cm^3 and about 20Hv. In addition, possibility of the processing by the injection molding for wood was shown.
|
