2012 Fiscal Year Final Research Report
Development of metal-honeycomb-type structured catalyst system contributing to an advanced progression of hydrogen production
| Project/Area Number |
22360330
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (B)
|
| Allocation Type | Single-year Grants |
|---|
| Section | 一般 |
|---|
| Research Field |
Reaction engineering/Process system
|
|---|
| Research Institution | Shizuoka University |
|---|
Principal Investigator |
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
TATEMOTO Yuji 静岡大学, 工学部, 准教授 (00324335)
KOHNO Yoshiumi 静岡大学, 工学部, 助教 (50334959)
|
|---|
| Project Period (FY) |
2010 – 2012
|
| Keywords | 新エネルギー / 水素製造システム / 触媒反応システム / 水蒸気改質 |
|---|
| Research Abstract |
In order to construct a novel hydrogen production system, a honeycomb-type nickel-based catalyst systemwas constructed by a combination technique consisting of a sol-gel method and an electroless plating on a stainless steel substrate. The constructed system demonstrated high reforming property of methane steam reforming and high hydrogen production ability close to the equilibrium conversion. The multifunctional reforming system, which combined with a catalytic combustion through the reactor wall, was also constructed. This combined reforming system enabled a rapid supply of thermal energy to reactive zone by conductive heat transfer and produced an improvement of a great advance of hydrogen production ability.
|
