2013 Fiscal Year Final Research Report
New Sensorless Vector Control of AC Motors Using DC Link Current
| Project/Area Number |
23560330
|
|---|
| Research Category |
Grant-in-Aid for Scientific Research (C)
|
| Allocation Type | Multi-year Fund |
|---|
| Section | 一般 |
|---|
| Research Field |
Power engineering/Power conversion/Electric machinery
|
|---|
| Research Institution | Nagasaki University |
|---|
Principal Investigator |
TSUJI Mineo 長崎大学, 工学(系)研究科(研究院), 教授 (80145218)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
HIGUCHI Tsuyoshi 長崎大学, 大学院工学研究科, 教授 (50156577)
ABE Takashi 長崎大学, 大学院工学研究科, 准教授 (30222649)
HAMASAKI Shin-ichi 長崎大学, 大学院工学研究科, 助教 (80363472)
|
|---|
| Project Period (FY) |
2011 – 2013
|
| Keywords | センサレスベクトル制御 / DCリンク電流 / 誘導電動機 / 同期電動機 |
|---|
| Research Abstract |
We studied the speed sensorless vector control of AC motors using DC link current. At first, we proposed a simplified sensorless vector control of induction motor. We developed a method which estimate phase currents from DC link current and pulse width modulation (PWM) signals. This method is confirmed by simulation results which are obtained by considering PWM. The developed method was tested by experimental systems and good transient responses are obtained without using phase currents. Furthermore, we proposed a simplified sensorless vector control of an interior permanent magnet synchronous motor (IPMSM). This method is tested by experimental system. It is confirmed that the experimental transient responses are very close to simulation results which consider PWM. Since quick responses are obtained, the proposed method is useful for industrial applications.
|
Research Products
(6 results)
