2013 Fiscal Year Final Research Report
Development of material testing technique for polycrystalline metals subjected to multiaxial stresses
Project/Area Number |
24760098
|
Research Category |
Grant-in-Aid for Young Scientists (B)
|
Allocation Type | Multi-year Fund |
Research Field |
Production engineering/Processing studies
|
Research Institution | Yamagata University |
Principal Investigator |
YOSHIDA Kengo 山形大学, 理工学研究科, 助教 (70436236)
|
Project Period (FY) |
2012-04-01 – 2014-03-31
|
Keywords | 塑性変形 |
Research Abstract |
Experimental technics for measuring the work hardening behavior was developed using the axial force-internal pressure-torsion type multiaxial stress testing machine. Work hardening behavior of a material subjected to variety of one stress component was also observed. The following conclusions were derived. Multiaxial stress test of A3003 revealed that the work hardening behavior depends not only on the accumulated plastic strain but also on the applied stress state. Uniaxial tension/compression and simple shear test of AZ31 showed that the work hardening behavior is drastically affected by the stress state provided that deformation twining is activated.
|