1989 Fiscal Year Final Research Report Summary
Study on a Piezoelectric Angular Rate Sensor with High Stability
| Project/Area Number |
63550284
|
|---|
| Research Category |
Grant-in-Aid for General Scientific Research (C)
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
電子機器工学
|
|---|
| Research Institution | Ishinomaki Senshu University (1989)
Yamagata University (1988) |
|---|
Principal Investigator |
SUGAWARA Sumio Ishinomaki Senshu Univ., Assistant Professor, 理工学部, 助教授 (00007197)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
TOMIKAWA Yoshiro Yamagata Univ., Professor, 工学部, 教授 (80007004)
KUDO Subaru Ishinomaki Senshu Univ., Research Assistant, 理工学部, 助手 (20214968)
KONNO Masashi Ishinomaki Senshu Univ., Professor, 理工学部, 教授 (50006962)
|
|---|
| Project Period (FY) |
1988 – 1989
|
| Keywords | Gyroscope / Angular rate sensor / Vibratory gyro / Piezoelectric vibrator / Gyroscopic sensor / Double-resonant vibrator |
|---|
| Research Abstract |
The purpose of this research is to develop a piezoelectric angular rate sensor with high stability. Some devices are done to realize such a sensor. (1) Design by a Electro-mechanical Equivalent Circuit Sensor characteristics of a piezoelectric angular sensor can be designed by use of the equivalent circuit proposed here. This circuit needs measured equivalent circuit constants of a piezoelectric double-resonant vibrator, and are also utilized to simulate null signal characteristics of the sensor. (2) Construction of a Angular Rate Sensor with a Wideband Frequency Characteristic In the construction, electrical tuning inductors are inserted parallelly to the terminals of a ordinal piezoelectric double-resonant vibrator. The drive-side resonant frequency need not to coinside with the detection-side one, and the sensitivity of the sensor is all equal in a wideband frequency range. (3) The electronic circuits for drive and detection of a sensor are also considered.
In conclusion, null signals in a piezoelectric double-resonant vibrator must be stable and constant at a drive frequency for stabrility. As a device is considered now, this attempt will be adopted to design a angular rate sensor from now on.
|
Research Products
(8 results)
