1989 Fiscal Year Final Research Report Summary
Development of Mossbauer spectroscopic microanalyzer X-ray analyzer
| Project/Area Number |
63840013
|
|---|
| Research Category |
Grant-in-Aid for Developmental Scientific Research
|
| Allocation Type | Single-year Grants |
|---|
| Research Field |
物理化学一般
|
|---|
| Research Institution | Tokyo Metropolitan University |
|---|
Principal Investigator |
SANO Hirotoshi Tokyo Metoropolitan Univ. Fac. Of Sci. Professor, 理学部, 教授 (20086995)
|
|---|
| Co-Investigator(Kenkyū-buntansha) |
OOSAWA Takao Seiko Instruments Inc., 部長
TAGUCHI Takao Seiko Instruments Inc. Director, 部長
ENDO Kazutoyo Tokyo Metoropolitan Univ. Fac. Of Sci. Associate Prof, 理学部, 助教授 (50106598)
KATADA Motomi Tokyo Metoropolitan Univ. Fac. Of Sci. Associate Prof, 理学部, 助教授 (20094261)
|
|---|
| Project Period (FY) |
1988 – 1989
|
| Keywords | CEMS / Surface layer / Scattering electron / Conversion electron Mossbauer spectroscopy / Characteristic X-ray / Mossbauer spectroscopy / Coincidence |
|---|
| Research Abstract |
The X,gamma-ray coincidence system used in this study is shown in Fig. 1. The chemical state of ^<57>Fe atoms produced through the de-excitation associated with the nuclear transformation was studied by this system. The X,gamma-ray coincidence techniques were confirmed in various kinds of chemical compounds.
By means of the conventional conversion electron Mossbauer spectroscopy (CEMS), We also studied AMP surface layer of tin, tin- or zinc-coated iron plates corroded by various acids. Metastannic acid was formed, when the tin plate was corroded by nitric acid solution. In corrosion by phosphoric acid solution, tin(IV) pyrophasphate was formed. In corrosion of tin-coated iron plates maleic acid, malonic acid, formic acid, and oxalic acid were used. It was determined by CEMS that the corrosion products caused by these acids were tin(IV) oxides, although they could not by identified by the X-ray diffractometry. It was confirmed that CEMS was a useful technique for the studies on surface layers of corroded substance. Application of CEMS to iron-barium glaze was carried in order to clarify the chemical state of iron in the glaze.
The X-ray associated by irradiation of ^<57>Co-gamma-ray were determined by the use of solid state detector and the elements contained in tin- coasted iron were identified. In this experiment Mossbauer gamma-ray source (^<57>Co) was used as an irradiation source. Thus CEMS was combined with X-ray analysis.
However, Mossbauer spectroscopic microanalyzer was not confirmed sufficiently. We must be improve a colimating and spotting systems in future.
|
